Close
0

Cart

Loadding...
Home>Raspberry pi>Raspberry pi 4 2GB/4GB/8GB kit Raspberry Pi 4 Model B PI 4B: +Heat Sink+Power Adapter+Case +HDMI Cable+3.5 inch screen
Raspberry pi 4 2GB/4GB/8GB kit Raspberry Pi 4 Model B PI 4B: +Heat Sink+Power Adapter+Case +HDMI Cable+3.5 inch screen

Raspberry pi 4 2GB/4GB/8GB kit Raspberry Pi 4 Model B PI 4B: +Heat Sink+Power Adapter+Case +HDMI Cable+3.5 inch screen

US$ 109.55
size

Copy and share this link on social network or send it to your friends

Copy
    • Product Name: Raspberry pi 4 2GB/4GB/8GB kit Raspberry Pi 4 Model B PI 4B: +Heat Sink+Power Adapter+Case +HDMI Cable+3.5 inch screen
    • Item NO.: RPi1
    • Weight: 0.6 kg = 1.3228 lb = 21.1644 oz
    • Category: Raspberry pi
    • Tag: Raspberry pi 4
    • Creation Time: 2020-12-09

    In stock Raspberry pi 4 2GB/4GB/8GB kit Raspberry Pi 4 Model B PI 4B: +Heat Sink+Power Adapter+Case +HDMI Cable+3.5 inch screen

    Note

    The fan and the screen need to be connected via pin headers, there is no way to use them at the same time.

    Raspberry Pi 4 Model B 8GB description

    The speed and performance of the new Raspberry Pi 4 is a step up from earlier models. For the first time, we've built a complete desktop experience. Whether you're editing documents, browsing the web with a bunch of tabs open, juggling spreadsheets or drafting a presentation, you'll find the experience smooth and very recognizable — but on a smaller, more energy-efficient and much more cost-effective machine. 1.The fanless, energy-efficient Raspberry Pi runs silently and uses far less power than other computers. 2.Raspberry Pi 4 comes with Gigabit Ethernet, along with onboard wireless networking and Bluetooth. 3. new Raspberry Pi 4 has upgraded USB capacity: along with two USB 2 ports you'll find two USB 3 ports, which can transfer data up to ten times faster.

    Item Specification

    Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC 1.5GHz 1GB, 2GB or 4GB LPDDR4-2400 SDRAM (depending on model) 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Gigabit Ethernet 2 USB 3.0 ports; 2 USB 2.0 ports. Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards) 2 × micro-HDMI ports (up to 4kp60 supported) 2-lane MIPI DSI display port 2-lane MIPI CSI camera port 4-pole stereo audio and composite video port H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode) OpenGL ES 3.0 graphics Micro-SD card slot for loading operating system and data storage 5V DC via USB-C connector (minimum 3A*) 5V DC via GPIO header (minimum 3A*) Power over Ethernet (PoE) enabled (requires separate PoE HAT) Operating temperature: 0 – 50 degrees C ambient

    EU Power Adapter 5V 3A Type-C Power Supply

    Adapter feature - Input: 100-240V 50/60Hz 0.3A; Output: 5V 3A; Raspberry pi 4 generation power supply interface, type-C can be inserted both front and back side,it will not appear the issue of plugging reverse. Note: Raspberry PI 4 special power supply, could not support 3B+/3B! Raspberry pi 4B has upgrade hardware, the overall power consumption function is imporve; The current is bigger than Raspberry pi 3B+, with 5V 3A adapter, can be support Raspberry pi 4B. It included different of function, such as over power protection, over current protection, short circuit protection, over voltage protection, under voltage protection, electrostatic protection.

    Packing list

    Bundle 1:

    Bundle 2:

    Bundle 3:

     


     
     

Customer Reviews

4.6

2019-12-14

Lo****15
This kit was an impulse buy for me due to a flash sale. Everything is easy to assemble. The kit comes with two Micro-HDMI-to-HDMI cables (many come with just one) which is a plus. Also, the AC adapter has an inline power switch, a quality touch as well. I had a spare 128GB SD card which I used instead of the included 32GB one; I used the kit's SD-to-USB adapter (which supports USB-B and USB-C) to load N00bs on the card easily. I loaded Raspbian Buster on the system, then RetroPie, then Kodi, without a hitch.The case is very functional, moreso than the stock Raspberry Pi case. There is a slot for the GPIO cable, and everything fits and aligns well. There is only one issue, for which I took off one star. The fan is smaller, and noisy; this is not helped by the grille in the case which increases airflow restriction and turbulence. It makes an audible whooshing sound one can hear at ten feet. I'm strongly tempted to try and modify the case with a Dremel to accept a 40mm fan.Pros:Raspberry Pi 4B 4GB (a powerhouse)Everything you need included (memory card, adapter for writing to it, heatsinks, case, fan, instructions)2 mHDMI-to-HDMI cablesAC adapter has inline power switchCons:Fan is noisy; a better pick (preferably larger, with a case that could accomodate it) would be a plusCase built in fan grille looks nice, but contributes to the noise issue.Apps still haven't been made fully optimized for the Raspberry Pi 4B (they will be). This is not a knock on the kit, but if you're not looking for high-end video playback, a Raspberry Pi 3B+ may also do what you want (I wanted the new video processing capabilities).All in all, at the Flash Deal price, this was a great offering. At the regular price, you may wish to compare other equally-priced kits to see if it will be quieter (though the 20-30mm fans will likely be a bit noisy no matter whom you get). Alternately, getting a FLiRC case (which requires no fan) which is fanless and quiet may be well worth the expense.

2019-12-11

Co****tt
I bought this to create a OctoPi for my 3d printer to control the printing and sending files to it without using a SD card. The kit assembled quickly. If you are shocked by no directions, look at the listing and there's directions for assembly. It's not my first Pi setup, so it was fairly straight forward. I just watched the video to confirm that I connected the fan correctly.It's a great kit for the price, the only downside was the very loud fan. I've worked on quieting my 3d printer, so with this fan I couldn't tell if the printer was on or off because of the loud volume of the fan. With the savings, I bought a 4 pack of quiet fans and now you can't tell if it's on in the room without looking at a screen.It's quicker than my Pi3B+ and the Ethernet is true gigabit so it's great for transferring the large print files. The processing is using less CPU and memory, so I will be able to set it up to do the slicing for the 3d printer without installing slicer software on every PC in the house. I use a USB camera, so it doesn't affect me that there isn't a camera in the package. It was just what I needed to make an OctoPrint OctoPi.

2019-12-04

Da****es
Great product it was as expected and the delivery were faster than expected.

2019-12-03

Am****er
it was alright not much of different when it came to performance wise if compare to a raspberry pi 3

2019-12-02

Le****li
The kit is very tidy and complete. However, after opening it, I discovered that 4 GPIO pins in the raspberry board where bent. Since all the components in the kit are really well packed I don't think this problem was caused by the courier handling, but rather in the kit packing and assembly process by the provider. Luckily with a pair of pliers and caution I was able to get the pins straight again.

Subscribe To Our Newsletter